Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Roseville?
Chimney repair in Roseville typically costs $350 to $1,800, with most common masonry and flue fixes landing between $500 and $900. Small jobs like a crown patch or a new cap run $350 to $650, while a full stainless liner replacement for a deteriorated flue runs $2,500 to $6,500 depending on height and diameter. The written estimate you get after an inspection sets the final price, and that estimate is free.
We’re Chimney Sweep Roseville, and chimney work is all we do. Our technicians have up to 9 years of experience, we work exclusively with recognized industry brands like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and we handle the inspection, the cleaning, and the repair so you don’t have to track down a second contractor for follow-up work.
Key Takeaways
- Typical chimney repair in Roseville: $350 to $1,800, with most jobs in the $500 to $900 range.
- The flue liner is usually the biggest line item, and it’s also the one most tied to fire safety.
- HeatShield ceramic resurfacing can restore a pitted flue for less than a full reline in the right conditions.
- Estimates are free, and the estimate follows an inspection, not a guess over the phone.
- Call (833) 946-0150 to book. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Repair Cost Breakdown (2026)
These are typical estimated ranges for the Roseville market in 2026. Prices vary with roof pitch, chimney height, access, and how much hidden damage turns up once we’re on the roof.
| Repair Item | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney cap replacement | $350 – $650 | New cap and screen sized to the flue; keeps rain, birds, and debris out |
| Crown repair (patch or rebuild) | $450 – $1,200 | Sealing hairline cracks or recasting a cracked crown that’s letting water in |
| Masonry tuckpointing | $600 – $2,000 | Grinding out and replacing deteriorated mortar joints in the brickwork |
| Flue tile replacement (single section) | $700 – $1,500 | Removing and resetting a cracked clay tile in the liner |
| HeatShield ceramic flue resurfacing | $1,200 – $2,800 | Ceramic resurfacing of a damaged flue to restore a smooth, sealed surface |
| Stainless liner replacement (DuraFlex) | $2,500 – $6,500 | Full-length flexible stainless liner for a flue that can’t be resurfaced |
| Damper replacement | $400 – $900 | New top-sealing or throat damper for a damper that won’t seal or operate |
| Firebox repair | $800 – $2,500 | Rebuilding firebrick or resurfacing a firebox with deteriorated mortar |
| Chimney leak diagnosis and repair | $350 – $1,000 | Finding the entry point and sealing flashing, crown, or masonry gaps |
What pushes the number up: height and access. A chimney that requires ladders and a roof walk on a steep pitch adds labor. So does a flue that’s been cracked for years, because water damage spreads into the brickwork and the crown. What brings it down: catching the problem early. A $500 crown repair now is a lot cheaper than a $2,000 tuckpointing job later, and that’s the honest reason we push inspections.
One thing to understand about Roseville specifically: this is a hot, dry summer climate with mild winters, and that combination matters for masonry. Brick and mortar expand in July and contract in January, and after enough of those swings, the mortar joints at the crown and the top few courses take the most stress. That’s where the cracks usually start. It’s also why a chimney that looks fine from the ground can have a crown problem that only shows up when someone gets up there.
What Affects Chimney Repair Pricing in Roseville
- Flue condition. The liner is the safety-critical component. A flue with cracked or missing tiles needs either HeatShield resurfacing or a full DuraFlex liner, and those are two very different price points. We only recommend resurfacing when the flue is structurally sound enough to hold it.
- Chimney height and roof access. A single-story ranch with a low pitch is easier to work on than a two-story home with a steep roof. Labor is priced by access, and access is real.
- Water damage already in progress. Roseville’s dry summers mean leaks often go unnoticed until the rainy season. By then, cracked crowns and saturated brickwork can add $500 to $1,500 to a job.
- Material and brand specification. We specify DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because they’re built for chimney applications. Off-brand substitutes can cost less up front and fail early, and we don’t install them.
- Appliance type. A wood-burning fireplace, a wood stove, and a gas insert each have different venting requirements. Gas appliances vent differently and often need different liner sizing than a wood-burning setup.
- Whether repair or replacement is the better call. Sometimes a spot repair buys ten more years. Sometimes it just delays the reline. An inspection tells you which, and that’s the conversation we have before any work starts.
How to Save on Chimney Repair
The cheapest chimney repair is the one you do before the damage spreads. A few things that genuinely help:
- Get an annual inspection. A chimney inspection isn’t a formality, it’s a fire-safety checkpoint. NFPA 211 Level I, II, and III inspections are the standard, and catching a cracked crown in spring is far cheaper than rebuilding the top of a chimney in fall. Read more about what we look for on our Chimney Sweep Roseville page.
- Don’t skip sweeping. A clean flue lets us see cracks that creosote and soot hide. Sweeping and repair go together.
- Fix the crown before the brickwork. Water enters at the top. Sealing the crown early protects the masonry below it.
- Ask about HeatShield before assuming you need a full liner. It’s not right for every flue, but when the conditions fit, it can save real money over a complete reline.
- Get the estimate in writing. We do free estimates, and the write-up tells you what’s getting done and what it costs before anyone touches the roof.
One caution: if someone quotes you a repair without getting on the roof or sending a camera down the flue, be careful. Chimney work is diagnosed, not estimated by eye from the driveway. Call (833) 946-0150 for a free estimate based on an actual inspection.
What Happens When You Call
We answer, we ask what’s going on with the chimney, and we book an inspection. The inspection is the starting point for every repair estimate, because the flue, the crown, the firebox, and the damper all get looked at before we quote. Through it all, your chimney is inspected, cleaned, and repaired by the same company. You won’t get a report from us and then have to track down someone else to act on it.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Roseville?
Chimney repair in Roseville typically runs $350 to $1,800, with most jobs between $500 and $900. A cap or crown patch sits at the low end; a full liner replacement sits at the top. The written estimate sets the final price. Call (833) 946-0150 for a free estimate.
How much does flue liner replacement cost in Roseville?
A full stainless liner replacement in Roseville typically costs $2,500 to $6,500, depending on chimney height, flue diameter, and access. Ceramic resurfacing with HeatShield can cover the same problem for $1,200 to $2,800 when the flue qualifies. Both keep combustion gases inside the flue where they belong. Call (833) 946-0150 to find out which one applies to your chimney.
Is it cheaper to repair a chimney or replace it?
Repair is almost always cheaper in the short term: a $450 crown patch versus thousands for a partial rebuild. Replacement makes more sense when the masonry is failing along most of its height or the flue can’t be reliably restored. An inspection is the only honest way to answer that question. Call (833) 946-0150 to book one.
How much does an inspection cost before the repair?
The inspection we do before a repair estimate is built into our free estimate process. You don’t pay a separate inspection fee before we quote the repair, and the quote is written, itemized, and set per job. Call (833) 946-0150 to schedule.
Can you come today?
Often, yes. We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service depends on the day and the route; calling early gives you the best shot. Call (833) 946-0150 and we’ll tell you what’s open.
Why Call a Chimney Specialist Instead of a Handyman
A chimney isn’t a piece of trim or a fence post. It’s a venting system with specific requirements, and getting it wrong means combustion gases in places they shouldn’t be. That’s why we’re a chimney-only operation. Technicians who split their time between chimneys, plumbing, and HVAC aren’t spending all their hours on flue work, and the details matter here: liner sizing, clearances, crown slope, and damper operation all have standards.
We specify DuraFlex and Copperfield liner systems by name because they’re purpose-built for chimneys, not adapted from general hardware. We use HeatShield, the ceramic flue resurfacing system, because it fills a gap between “live with it” and “replace the whole liner.” And for inspections, we work to NFPA 211 Level I, II, and III standards so the report means something. If you want to read more about what a proper repair involves, our chimney repair page walks through the work itself.
What a repair estimate actually evaluates
- The flue liner: tiles intact, joints sealed, correct size for the appliance
- The crown: slope, cracks, and whether water is pooling instead of running off
- The masonry above the roofline: mortar joints, spalling brick, and the top courses
- The flashing: the seal where the chimney and roof meet, which is where most leaks start
- The firebox and damper: firebrick condition, mortar joints, and whether the damper seals
- The cap: present, intact, and sized correctly with a screen for pests and embers
That list is why chimney repairs range so widely in price. Two chimneys can both have “a leak” and need wildly different work.
Safety: Why Some of This Isn’t a Do-It-Yourself Job
Some chimney tasks are genuinely dangerous. Working on a roof is dangerous. Opening up a flue can expose you to creosote, which is a known carcinogen. And anything involving the venting path for a gas appliance involves combustion byproducts that can be deadly if the work is wrong. We recommend trained professionals for anything beyond a visual check from the ground and keeping the cap clear of debris.
This is the calm version of the warning: if your carbon monoxide detector goes off, get everyone out and call the fire department first. Then call a chimney professional. Gas inserts and wood stoves both depend on correct venting, and that’s not a “we’ll watch a video” job.
Questions to Ask Any Chimney Contractor in Roseville
- Will you get on the roof and inspect the flue, or are you quoting from the ground?
- What standards do you inspect to? (NFPA 211 Level I, II, or III)
- If my flue needs work, will you recommend resurfacing or replacement, and why?
- What products do you install? Will you specify them in writing?
- Is the estimate free, and is the price set before work starts?
- Can you do the inspection, the cleaning, and the repair, or do I need a second contractor?
We’re happy to answer these about ourselves. Every one of them is a fair question, because chimney work is a safety purchase, not a cosmetic one.
Get Your Free Chimney Repair Estimate
If you’re in Roseville and your chimney has a cracked crown, a leaking flashing, a damper that won’t close, or a flue you haven’t had looked at in a while, call (833) 946-0150 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Your chimney is inspected, cleaned, and repaired by the same company, using the same professional-grade products certified chimney professionals use.
Chimney work is all we do. That focus is the point.
Pricing reflects the Roseville market as of 2026. Chimney Sweep Roseville offers free estimates – call (833) 946-0150.
Written by the team at Chimney Sweep Roseville.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Justin Nguyen"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Jeff Schaefer"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Megan Pruitt